Sneade's Lumber and Building Materials: Concrete

 60 lb bag equals 1/2 cubic foot

 80 lb bag equals 2/3 cubic foot

High strength concrete mix for anchoring posts and poles, and pouring footings and slabs.

• Meets ASTM C 387 strength requirements for structural applications
• Premium quality for consistent strength and durability.
• Build walks, drives, slabs and steps. Anchor posts and poles. 
• For applications requiring at least 2 inches in thickness. 
• Just add water.

A quality mixture of sand and cement designed for the overlaying of damaged concrete, and for use as a bedding mix for flagstone, slate or brick.

• Use as a bedding mix and joint grout for flagstone, slate and brick walkways.
• Use as a topping mix to rejuvenate damaged concrete surfaces in layers less than 2 inches thick.
• Exceeds strength requirement of ASTM C 387.
• Just add water.

Set posts and poles fast and easy, even without blending the material. Sets much faster than regular concrete so that no bracing is needed.

• Sets in just 1/2 hour.
• Set posts and poles without bracing or mixing.
• Exceeds strength requirement of ASTM C 387.
• For applications requiring at least 2 inches in thickness. 

A high strength mortar/ stucco mix for the laying of brick, block and stone in load-bearing walls and construction below grade.

• Contractor grade mortar mix.
• Smooth, buttery blend for laying brick, block and stone in load-bearing walls above and below grade level.
• Can be used as a stucco scratch and brown coat.
• Exceeds ASTM Specs C 387 and C 270 for type S mortars.
• Available in white and other colors in some regions.
• Just add water.

Portland Cement for use in custom cement mixes and base coat stuccos.

• Pre-blended for consistent quality.
• Use in 3:2:1 custom concrete mixes.
• Use as a base coat stucco.
• Meets ASTM C 150 for portland cement